Battling rodwear and tubing corrosion failures? We can help.
logo - home


Falcon Polycore™


Seamless High Density Polyethylene (HDPE) Liner

Falcon Polycore™ is a High Density Polyethylene (HDPE) liner as specified by the Plastic Pipe Institute’s Specification PE 3608. This product is highly abrasion resistant which accounts for its success in the elimination of tubing rod wear, wire line, mechanical, and handling damage. HDPE is chemically inert to corrosive materials enhancing its use as a corrosion barrier. The mechanically bonded seamless tube is tolerant to minor surface imperfections and eliminates concerns with holidays or voids as in adhesive or thermally bonded liners and coatings.

Some uses or applications of this product may be covered by one or more patents.

2 3/8" 1.71" 1.60" .40 #/ft
2 7/8" 2.16" 2.00" .47 #/ft
3 1/2" 2.67" 2.50" .64 #/ft


Primary Applications

  • Beam Pumped Wells
  • PC Pumped Wells
  • Submersible Pumped Wells
  • Plunger Lift Wells
  • Gas Lift Wells
  • Coal Bed Methane
  • Acid Gas Injection
  • Water Injection
  • Disposal
  • Flow Lines
  • Solution Mining



  • Eliminate rod on tubing wear
  • Corrosion control
  • Reduce well servicing frequency and cost
  • Reduce tubing and rod replacement
  • Reduce corrosion inhibitor requirements
  • Reduce friction and peak polish rod load
  • Eliminate rod guides
  • Optimize your current inventory by utilizing lower quality tubing
  • Apply over used coatings
  • No stabbing guides or special coupling inserts required
  • No field service technician required
  • Lined tubing in stock



  • Maximum operating temperature is 160° F (71° C) in oil production and 180° F (82° C) in aqueous service
  • Coated couplings to protect J-area against corrosion
  • Minimum API torque recommended for tubing connection make-up
  • No special position make-up required


Falcon Polycore Liner
Coated couplings to protect
J-area against corrosion.


polycore tubing
Liner face provides pin
thread protection.