Polycore™
Seamless High Density Polyethylene (HDPE) Liner
Falcon Polycore™ is a High-Density Polyethylene (HDPE) liner. HDPE is chemically inert to corrosive materials enhancing its use as a corrosion barrier. The mechanically-bonded seamless thermoplastic tube is tolerant to minor surface imperfections and eliminates concerns with holidays or voids as in adhesive or thermally bonded liners and coatings.
Coated couplings to protect J-area against corrosion
Liner face provides pin thread protection.
Falcon Polycore™ is a High-Density Polyethylene (HDPE) liner. HDPE is chemically inert to corrosive materials enhancing its use as a corrosion barrier. The mechanically-bonded seamless tube is tolerant to minor surface imperfections and eliminates concerns with holidays or voids as in adhesive or thermally bonded liners and coatings.
Coated couplings to protect J-area against corrosion
Liner face provides pin thread protection.
PC Pumped Wells
Submersible
Pumped Wells
Gas Lift Wells
Acid Gas Injection
Water Injection
Coal Bed Methane
Disposal
Solution Mining
Corrosion control
Reduce well servicing frequency and cost
Reduce tubing and rod replacement
No stabbing guides or special coupling inserts required
No field service technician required
Reduce friction and peak polish rod load
Eliminate rod guides
Optimize your current inventory by using liners
Apply over used coatings
Lined tubing in stock
- Maximum operating temperature is 160° F (71° C) in oil production and 180° F (82° C) in aqueous service
- Coated couplings to protect J-area against corrosion
- Minimum API torque recommended for tubing connection make-up
- No special position make-up required
- Beam Pumped Wells
PC Pumped Wells
Submersible
Pumped Wells - Plunger Lift Wells
Gas Lift Wells
Acid Gas Injection
Water Injection - Flow Lines
Coal Bed Methane
Disposal
Solution Mining
- Eliminate rod on tubing wear Corrosion control
- Reduce well servicing frequency and cost
- Reduce tubing and rod replacement
- No stabbing guides or special coupling inserts required
- No field service technician required
- Reduce corrosion inhibitor requirements
- Reduce friction and peak polish rod load
- Eliminate rod guides
- Optimize your current inventory by using liners
- Apply over used coatings
- Lined tubing in stock
- Maximum operating temperature is 160° F (71° C) in oil production and 180° F (82° C) in aqueous service
- Coated couplings to protect J-area against corrosion
- Minimum API torque recommended for tubing connection make-up
- No special position make-up required
Need a higher collapse strength?
Contact your Field Representative Today for a Customized Solution
Western Falcon has demonstrated success in over 70 million feet (20 million meters) of pipe in the last 20 years! There is not a well we can’t fix.